What is the maximum number of LED T5 retrofits I can connect in series?
Nov 07, 2026
If you’ve ever dabbled in upgrading old fluorescent light setups to LEDs, you’ve probably stumbled across T5 retrofit tubes—and asked the same question that keeps popping up in my DMs and customer support inbox: How many of these bad boys can I wire in series? As a supplier of T5 LED retrofits for commercial spaces, small businesses, and home workshops, I get this question all the time. It makes sense—series wiring is a great way to cut down on wiring labor, reduce the number of fixtures you need to tap into, and keep your electrical setup neat. But mess it up, and you’ll end up with flickering lights, dead tubes, or even a trip to the electrician way sooner than you planned. Let’s break this down like we’re chatting over a coffee (minus the awkward small talk) so you don’t waste time or money.
First, let’s get one thing straight: T5 LED tubes aren’t all the same. That’s a huge mistake I see new installers make—they grab any old T5 retrofit and assume the same series rules apply. For context, there are two main types of T5 retrofits out there: single-ended and double-ended. Single-ended tubes have both power pins on one end of the tube, and they require you to wire the same power source to all the tubes you run in series. Double-ended tubes have pins on both ends, meaning power has to go into one end of the first tube, out the other, into the next, and so on. This is super important because it’s the biggest factor in how many you can string together. And no, I’m not just pulling this out of thin air—we stock a ton of these, and we’ve tested every single model to make sure our installation guides are actually useful, not just a generic download. Our most popular pick for series setups is the T5 LED Integrated Tube Light because it’s designed specifically for series runs, but more on that later.
Now, let’s talk about the elephant in the room: why series limits even exist. Unlike old fluorescent tubes, which are linear devices that work fine in series (well, most of the time), LED tubes are solid-state electronics. They have built-in drivers that convert line voltage to the low DC voltage the LEDs actually need. Each driver has a maximum voltage it can handle, and that’s where the series count cap comes from. Let’s do a quick basic math example to make this easy. Say your local power supply is 120V (common in North America) or 240V (standard in Europe and most other places). If each T5 driver has a maximum voltage drop of 12V, that means on 120V, you could theoretically run 10 tubes in series—but wait, that’s the absolute max, and that’s not including a little buffer for voltage drop along the wiring. Real-world conditions mean wires lose a tiny bit of voltage over length, so you can’t hit that theoretical number every time. That’s why all reputable LED suppliers, including us, factor in a 10-15% buffer to avoid issues.
But wait, here’s the thing: that 10-tube number is for single-ended T5 retrofits. Double-ended ones are a whole different ballgame. Double-ended T5s have two separate circuits per tube, each wired for their own power input. If you try to wire double-ended tubes in series, each tube will only get half the voltage it needs, and the LEDs will flicker so bad you’ll think your neighbor’s disco is next door. I once had a customer test this with 5 double-ended tubes they bought from another supplier, and they texted me a video of the mess—half the tubes didn’t turn on at all, and the ones that did stuttered like a broken record. That’s why we don’t recommend wiring double-ended T5s in series, period. If you need double-ended, stick to parallel wiring instead. For series runs, our customers love the 4ft Lighting Led Tubes Integrated T5 because it’s single-ended, has a reliable driver, and works consistently up to the recommended series count.
Now, let’s get into the actual maximum number you can safely connect in series. This is where we have to tie in two key specs: your power input voltage and the driver’s operating range. Let’s use our own products as examples since that’s what I know best, and I can’t speak for every random brand out there. For our standard T5 LED Integrated Tube Light (the 4ft and 2ft versions, which are our bestsellers), here’s the breakdown: on a 120V circuit, you can run a maximum of 8 tubes in series. On 240V, that jumps to 16. Why the difference? Because higher line voltage means each tube drops less of the total voltage, so you can fit more without exceeding the driver’s limit. But wait, why not 10 on 120V like the theoretical number? Because the driver has a +/-5% tolerance, and wiring length adds another 5% drop. Let’s do that math: 120V minus 10% buffer is 108V total. Divide that by 12V per driver, and you get 9. The safe number is 8, not 9, because some older electrical panels might have a tiny voltage spike, and we’d rather you not have dead tubes as a result. That’s the kind of small detail that separates a good supplier from one that just dumps products on the market.
But hold up—there’s another exception here. What if you’re using a double tube T5 fixture, like our LED T5 Integrated Double Tube Light With Reflector? That’s two single-ended T5s in one housing, wired to a single driver. Can you wire the whole unit in series? Yes, but you have to adjust the count. Let’s say each double tube unit has two drivers, each needing 12V. On 120V, that’s (108V / 12V) = 9 drivers, so ~4 double tube units in series, not 8. That’s a key point I see customers miss all the time—they count the number of tubes, not the number of drivers. Each tube has its own driver, so each one counts towards that voltage total. If you’re using double tubes, divide the tube count by two, or count drivers individually.
Now, let’s talk about common mistakes that people make, because even if you stick to the number, you can mess it up. First, mixing brands of T5 retrofits. Not all drivers are created equal—one brand’s driver might have a 10V drop, another might have a 13V drop. If you mix a few different models in the same series run, you’ll end up with some tubes working and some dim, or all of them flickering. I once had a customer who bought three tubes from us and two from a big box store, wired them in series, and had a mess on his hands. Stick to the same model, same brand, same driver type if you want consistent results. Second, not disabling the ballast. If you’re retrofitting an old fluorescent fixture, you have to remove the old ballast when wiring LED tubes. That’s a non-negotiable. If you leave the ballast in the circuit, it will add extra voltage drop, and even if you don’t go over the theoretical number, you’ll have issues. All our installation guides walk you through ballast bypass step by step, so if you’re new to this, just follow that and you’re good. Third, using undersized wiring. If your series run is over 50 feet, you need to use 14-gauge wire instead of 16-gauge, because thinner wire drops more voltage over long distances. This is especially important if you’re running lights in a large space like a warehouse or a big retail store.
Wait a second—what if you need more than the maximum series count? Is there a way to get around this? Yeah, two easy fixes, no need to throw out your setup. First, split the run into two separate series circuits. Instead of running 10 tubes in series (which you can’t), run two parallel circuits, each with 5 tubes. That works because parallel circuits split the load evenly, so each gets the full line voltage. Second, use a booster driver if you need more than 16 tubes on a 240V circuit. A small booster driver can add 10-15V to the circuit, letting you fit a few extra tubes without exceeding their driver limit. But honestly, most commercial spaces never need that—our standard series counts work for 90% of installations.
Let’s also clarify something that gets confused with series wiring: T5 vs T8 compatibility. A lot of people ask if they can use T8 pins with T5 retrofits, and that’s where our T8 G5 Pin LED Tube Light comes in. Wait, no—T5 and T8 tubes have different pin spacing (5mm for T5, 8mm for T8), so you can’t just swap them. That link is for if you have an old T8 fixture and want to upgrade to T5, but make sure the pins match. But when it comes to series, the pin size doesn’t affect the series count—what matters is the driver, which is why all our T5 tubes, regardless of size, have standardized drivers so our series counts stay consistent.
Now, I want to be real with you—this isn’t just about numbers on a spec sheet. If you get the series count right, you’re saving money on wiring, reducing installation time, and making your lights last longer. LED tubes fail prematurely when they’re overvoltage, so sticking to the max count is a quick way to get 50,000+ hours of light instead of 10,000. I’ve seen customers cut corners by adding one extra tube to a series run and end up replacing the whole set 6 months later, which ends up costing them more in the long run. As someone who’s been selling T5 retrofits for 8 years, that’s the last thing I want to see.


So let’s recap the quick, easy guide so you don’t have to scroll back:
- Only wire single-ended T5 retrofits in series—double-ended will flicker or die.
- Same brand, same model only—mixing drivers = bad news.
- On 120V max: 8 single tubes, 4 double tubes, or 8 units total if each is a single tube.
- On 240V max: 16 single tubes, 8 double tubes.
- Always bypass the old ballast, use the right gauge wire for long runs, and keep that 10-15% voltage buffer from wiring drop.
If you’re still unsure, don’t guess. I get it—electrical stuff can feel overwhelming, especially if you’re not a licensed electrician. We’ve helped hundreds of customers over the years, from small café owners upgrading their kitchen lights to warehouse managers outfitting 10,000 sq ft of space, and we can walk you through exactly how many T5 retrofits you can connect in series for your specific setup. We don’t do generic, one-size-fits-all advice—we look at your power voltage, your fixture type, and how far the run is to give you the exact number that works for you. Whether you need a small order for a home workshop or a bulk order for a commercial project, we’ve got the reliable, series-ready T5 tubes you need, and our team is here to help with any questions you have. Hit us up to chat about your project and get all the details sorted out.
References
- LED retrofit installation guidelines for solid-state lighting drivers, Department of Energy Building Technologies Office, 2022
- T5 and T8 tube electrical compatibility and wiring standards, National Electrical Manufacturers Association, 2021
- Voltage drop calculations for series LED lighting circuits, National Fire Protection Association 70 (NEC), 2023
